Tag Archives: kodak tri-x

Walking on the beach with some 35mm Kentmere 400 (and a little Tri-x)

In the summer of 2022 I made a quick trip to Wilmington, NC. I was there to help some family members pack up and move out of town. It was a quick in and out over a weekend. I knew I would have one evening to myself so I planned on going down to Kure Beach to make some black and white photographs of the sand and surf.

Kure Beach, NC
Rippling sands in between the grass on Kure Beach, NC. (Nikon N90s, Nikkor 24-35 AF, Kentmere 400, Xtol 1:1)

After a long hot couple of days of packing and loading I grabbed my gear with about 2 hours before sunset and headed out to Kure Beach. I knew there was a pier on the beach and some vehicle access but I had not been there before, so I didn’t really know what to expect. The sky was clear so there was no hope of getting a moody sky over the ocean. I had to work with what I had. I wasn’t disappointed when I arrived.

Kure Beach, NC sand ripples
Ripples in the sand at Kure Beach (Nikon N90s, Nikkor 24-35 AF, Kentmere 400, Xtol 1:1)

The sun was long and golden, but setting pretty fast and getting softer and softer as my time on the beach went on. I started out with a roll of Kentmere 400. I had not shot this film before and wanted to give it a try to see how it held up. I normally shoot Kodak Tri-X, but I was looking for a new film to switch to because the cost of Tri-X has gotten a bit high for me to just throw in the camera and shoot.

After looking at the spec sheet of Kentmere 400 and the curve that Ilford provides I thought it could be a promising replacement. I love the way Tri-X has some separation from the mid tones from the blacks. Something about it is just fantastic. I was hoping Kentmere 400 could get close. All the other films I have tried up to this point were either too even (flat) in their tonal rendition or too expensive.

Kure Beach, NC sand ripples
Sand ripples in the grass at Kure Beach, NC (Nikon N90s, Nikkor 24-35 AF, Kentmere 400, Xtol 1:1)

I started shooting the sand and the grass as the sun started heading down casting long raking light across the ripples revealing wonderful patterns and texture. I had to keep in mind to make sure I didn’t just walk over the sand and leave footprints all over, ruining any possible compositions. Metering was tricky for sure but I used the matrix meter on the shadow areas of the beach and decided to let the Kentmere 400 put the highlights where it wanted. I have to say I was pretty pleased with how this film handled it.

kite boarder Kure Beach, NC
Kite boarders race across the surf at Kure Beach, NC. (Nikon N90s, Tokina 300 f4 AT-X AF, Kentmere 400, Xtol 1:1)

Once I was done with the sand and grass I started down the beach. There were a dozen or so kite surfers out jumping and carving the waves. What cool thing to watch. I stopped and pulled out my tripod and swapped my lens for my 300mm Tokina prime. Once I got set up these guys saw me and started showing off. What a treat. I was loosing some light as the sun kept dropping and my shutter speeds were just on the edge of too slow but I managed to get a couple acceptable shots.

kite surfer jumping in the air
Kite surfer jumping in the air over the waves at Kure Beach, NC. (Nikon N90s, Tokina 300 f4 AT-X AF, Kentmere 400, Xtol 1:1)

There wasn’t many people on the beach that evening but I wanted to test the limits of the Kentmere with a backlit silhouette shot of some people walking on the beach. I am a sucker for back lit black and white photographs. I hung out a little, while the kite surfers were starting to come in for the day. Up the beach, with the sun almost at their backs, was a family doing some beach combing. Perfect. I kept the 300mm on and swiveled my camera around on the tripod and made a few exposures. I metered for the sky and stopped down one stop and took some shots.

beach combers Kure Beach, NC
Family of beach combers on Kure beach, NC. (Nikon N90s, Tokina 300 f4 AT-X AF, Kentmere 400, Xtol 1:1)

I knew I wanted to head down the beach to the Kure Beach Pier for some minimal long exposure shots. It was a little bit of a walk so I packed up and started down the beach. I remembered seeing some amazing wave photographs by some photographers I follow on social media and thought I would try to get some images of the waves on my way down to the pier. The waves weren’t much to look at compared to the giant ones I have seen but why not… So I shot a bunch of frames as I walked. It was fun.

waves at Kure Beach, NC
Waves rise and fall onto the beach at Kure Beach, NC. (Nikon N90s, Tokina 300 f4 AT-X AF, Kentmere 400, Xtol 1:1)

By the time I got down to the pier I shot through all of my Kentmere 400. I had to reload with Tri-X. With my Nikon reloaded I started taking stock in what the pier had to offer. The sun had set, and the last of the light was fading. Lights on the pier came on and it was a beautiful evening on the beach. I made some images on either side of the pier but nothing that excited me. Then I decided to go under the pier for that long look down the pylons.

Kure Beach Pier
Soft long exposure under the Kure Beach Pier. (Nikon N90s, Nikkor 24-35 AF, Kentmere 400, Xtol 1:1)

I set up directly in the middle of the pylons looking down the pier out to sea. I just loved the way the pier made a little house shape at the very end. Nice piece of interest to direct the eye. Directly behind me were some teenagers hanging out in some hammocks they strung up between the pylons. Right behind me… like 3 feet behind me. I made my meter reading in camera, calculated reciprocity and started shooting with my cable release. I wanted something smooth but still some view of the waves instead of the totally flat ghosting of the water so I kept my shutter speed on the shorter side. The image above is my favorite of the series I captured.

What to I think about Kentmere 400 along side of Tri-X? I have to say that I really liked it. I wanted to find a black and white film that would fit in with my existing development process that gave me similar results. Kentmere 400 in Xtol 1:1 is pretty close to Tri-X in my view. Contrast and tonal range is very similar. The grain structure is very similar too. I was happy enough with my results I ordered a bulk roll of the Kentmere 400. I will do some more experimenting on development times with the Kentmere 400 to see if I can get a closer look to Tri-X but I think if I were to put two images side by side, one Kentmere and one Tri-X, it would be hard to tell the difference.

If you are wondering if Kentmere 400 is worth adding to your creative workflow I would say it is absolutely worth it. Your mileage may vary, but I wouldn’t hesitate. Load it up and get out and shoot.

Keeping it Simple

Last summer my wife and I made it back to Montana to visit some friends and hang out in the area we used to live in. There were a lot of things to do, people to see and general catching up. I didn’t really make big photo plans for this trip so, photographically speaking, I packed pretty light. Limiting myself to my 35mm camera, a couple lenses and a few rolls of black and white Tri-x we hit the road for Montana.

We were able to spend a week with some close friends on the Gallatin river just outside Bozeman and hit all of our favorite restaurants. Our dog was in heaven again. Being able to roam freely along the river and hang out in the sun whenever and where ever she wanted. It was a very relaxing time.

Photographically, it was a place I had been many times before, for some reason I wasn’t really inspired to make photographs. Maybe because it felt so familiar. Not really sure, because it is a beautiful place to photograph.

Simple black and white composition of bridge at Sacagawea Park. 35mm, Tri-X, xtol 1;1

With a few days left in our trip we moved to different accommodations. We booked an Air BNB “down the hill” in Livingston, MT. I had been there many times but I hadn’t spent more than a couple of hours there at a time. Mostly to go get some lunch or dinner at one of the great places in town. My wife had plans that took her away from town for those few days leaving me without transportation, so I was relegated to hoofing it around town on my own.

At the edge of town, along the banks of the Yellowstone River, is Sacagawea Park. I had not spent much time there before, but it was pretty close to where we were staying so I decided to explore it a little. While shooting black and white photographs I look for simple compositions, I wasn’t really looking for an epic view of the mountains. (The forest fires were raging then and the sky was filled with smoke anyway.) I was able to isolate a few of the charming features of the park while I explored. One of them being the bridge that accesses the park.

The final photo turned out pretty much like I wanted. It has the calm feeling I wanted to portray with the still water reflecting the arches of the bridge and the discovery of peaking through the woodland to find the old bridge just beyond the water. Keeping the composition and gear simple when I made the photograph, it helps me remember the sounds and smells of that day when I made it. A very good memory.

Wilderness at your front door

Like most people I have a day job. Photography is my passion and I am lucky enough to be able to make the kind of photographs I want to make on my terms. However, the day job does sometimes cut into my available time to shoot as often as I would like. So I have to be creative with my time.

Recently I relocated from Montana to Minnesota. Some of you may be saying “What?…” I know. Minnesota is not known for it’s grand vistas, towering mountains and crazy cool wildlife. But it isn’t that bad actually. I haven’t been able to explore much yet, due to Covid-19, starting a new job and renovating a really old house.

I wasn’t going to give up though. I work from home, like a lot of folks nowadays, and my new home office is in the basement. It has a garden level view window right in front of my desk. Little did I realize what a perfect wildlife blind this window would be!

A cardinal couple stops by my window often looking for food.

Many times I have early phone/zoom meetings with my colleagues in Asia so I am often at my desk before the sun rises. My home is in a heavily wooded area right next to a huge lake (duh, Minnesota) and I started noticing that many mornings when I was on the phone all sorts of animals were roaming around my garden. They had no idea I was sitting there watching them!

I thought to myself, “here is my opportunity to photograph some wildlife!” I started having a camera with me on my desk every morning when I started work. While I am on calls, muted of course, I can shoot away at all the critters that come by my window. It’s really fun and a challenge.

One of the visiting foxes that stop by my window on their hunting rounds in the morning.

I have the usual squirrels and chipmunks that come by. They have even started to look into the window at me like I am some sort of zoo exhibit for them! Then there are the herds of deer and beautiful birds that stop by. The highlight of my “working” wildlife blind has been the red foxes. They have been really fun to photograph.

Now many of these are not going to be national geographic images. Most are snapshots at best. But I have had a few keepers that I enjoy and have added to my collections. The point is I had to find a way to keep my creativity and my eye exercised to keep making photographs.